This past weekend was very rough on our trees in the area. There are many trees that need some trimming to remove broken limbs or to clean up the break point after the branch has fallen off. Unfortunately, some trees have enough damage that they will need to be removed entirely. If you do need professional help to clean up your landscape, I do have a list of arborists that are in the area. Just call, email or stop by the office if I can help. Below is an article from Ward Upham, K-State Research and Extension’s horticulture expert with some tips on taking care of your storm damaged trees.
Winter storms may cause serious tree damage. Often you will have to decide whether a tree can be saved or not. Here is a checklist on care of a storm-damaged landscape.
1. Be careful: Slippery ice and chainsaws don’t mix. Wait until all ice has melted before beginning work. Check for downed power lines or hanging branches. Don’t venture under the tree until it is safe. If large limbs are hanging precariously, a certified arborist has the tools, training and knowledge to do the work safely.
2. Cleanup: Remove debris so you don’t trip over it.
3. Decide whether it is feasible to save a tree. If the bark has been split so the cambium is exposed or the main trunk split, the tree
probably will not survive and should be removed. If there are so many broken limbs that the tree’s form is destroyed, replacement is the best option.
Topping, where all the main branches are cut and there are only stubs left, is not a recommended pruning procedure. Though new branches will normally arise from the stubs, they are not as firmly attached as the original branches and more likely to break in subsequent storms. Also, the tree must use a lot of energy to develop new branches, leaving less to fight off diseases and insect attacks. Often, the topped tree’s life is shortened.
4. Prune broken branches to the next larger branch or to the trunk. If cutting back to the trunk, do not cut flush with the trunk but rather at the collar area between the branch and the trunk. Cutting flush with the trunk leaves a much larger wound than cutting at the collar and takes longer to heal. Middle-aged or younger vigorous trees can have up to one-third of the crown removed and still make a surprisingly swift comeback.
5. Take large limbs off in stages. If you try to take off a large limb in one cut, it will often break before the cut is finished and
strip bark from the tree. Instead, first make a cut about 15 inches from the trunk. Start from the bottom and cut one-third of the way up through the limb. Make the second cut from the top down but start 2 inches further away from the trunk than the first. The branch will break away as you make the second cut. The third cut, made at the collar area, removes the stub that is left.
Note: Pruning can be dangerous. Consider hiring a trained, certified arborist to do major work. Also, a good arborist knows how to prune trees so that storm breakage is less likely to occur. Preventing damage is better than trying to fix it once it has happened. The Arbor
Day Foundation maintains an excellent Web site that contains detailed information. The URL is: http://www.arborday.org/media/stormindex.cfm
Alicia Boor is the Agriculture and Natural Resources agent for Barton County K-state Research and Extension. One can contact her by email at aboor@ksu.edu or calling 620-793-1910